Condtrol Vector 80 - Handbuch

1

Vector 60/80

User manual

Laser distance meter

EN

Congratulations on your purchase of laser distance meter

Vector 60/80 CONDTROL.

Safety instructions can be found in the end of this user manual

and should be carefully read before you use the product for

the first time.

SAFE T Y REGUL ATIONS

The user manual should be read carefully before you use the

product for the first time. Unintended use of the product can

be dangerous for human’s health and cause serious injury.

Keep this user manual. If the product is given to somebody for

temporary use, be sure to enclose user manual to it.

- Do not misuse the product

- Do not remove warning signs and protect them from abrasion,

because they contain information about safe operation of the

product.

The device belongs to laser product class 2 in accordance with

EN60825-1.

Laser radiation!

Do not stare into beam

Class 2 laser

<1 mW 635nm

EN60825-1: 2007-03

- Do not look into the laser beam or its reflection, with

unprotected eye or through an optical instrument. Do not

point the laser beam at people or animals without the need.

You can dazzle them.

- To protect your eyes close them or look aside.

- It is prohibited to disassemble or repair the product yourself.

Entrust product repair to qualified personnel and use original

spare parts only.

- Do not use the product in explosive environment, close to

flammable materials.

- Avoid heating the batteries to avoid the risk of explosion and

electrolyte leakage. In case of liquid contact with skin, wash

it immediately with soap and water. In case of contact with

eyes, flush with clean water during 10 minutes and consult the

doctor.

Vector 60/80

1. Display

2. Keyboard

3. A hole for the strap

4. End-piece

5. Tripod thread 1/4’’

6. Mini-USB connector for charging

Functions of buttons

Button

Short press

Long press

Switch on the

device

Continuous

measurement

(tracking)

Switch on laser

beam

Single distance

measurement

Area

Memory

Wall surface*

Volume

Tilt sensor*

Pythagoras 1

Pythagoras 2

Pythagoras 3

Point to point*

Addition/

subtraction

Select reference

point

Stop measurement/

clear/exit the mode

Switch off the

device

+

simultaneously

Select measuring

unit

*-Vector 80 only

Display

1. Main line for displaying measuring results

2. Additional lines for displaying measuring results

3. Indication of tilt angle

4. Indication of the mode

5. Indication of point to point function

6. Indication of Bluetooth

7. Indication of battery charge level

8. Indication of max/min values

9. Indication of reference point

10. Indication of measuring unit

11. Indication of memory

OPERATION

Battery charging

Charge level is shown on display. Charge the battery when

symbol appears on the display. Use USB charger delivered

in the set only.

It is not recommended to use the product while charging.

It takes approximately 3 hours to fully charge the batteries.

Switch on/off the device

To switch on the device short press .

To switch off the device press and hold during 1 second.

Measuring unit

Short press and simultaneously to enter
service settings. Short press button to select
required measuring unit –

m/ft/in (meters/feet/inches)

.

Short press to confirm and return to single distance
measurement mode.

Reference point

Press and hold button during 1 second to select
the reference point. Appropriate indicator will appear on the
display.

Front Tripod Rear End-piece

(default)

Measurements

Single distance measurement

Short press

The device will switch on.

Short press

Laser beam will switch on.

Point the laser beam at the object of

measurement.

Short press

Make a single distance

measurement.

- Measurement result

Short press

Delete the last measurement result.

Continuous distance measurement (Tracking)

Press and hold

during

2 seconds

The device will start making

measurements one after another,

showing current measurement

result in the main line, maximal value

in the 1st line, minimal value in the

2nd line.

- Angle value

- Maximal value

- Minimal value

- Current value

Press or

Stop continuous measurement.

The last measured values are shown

on the display.

Addition/subtraction

Short press

Turn on laser beam.

Aim the product at measured object.

Short press

Take first measurement.

Measuring result appears in the main

line.

Short press

The symbol of addition/subtraction

will appear on the display.

Short press

Turn on laser beam. 1st measuring

result moves to the line 2 on the

display.

Short press

Take 2nd measurement.

- 1st measurement

- 2nd measurement

- result of addition /subtraction

To do addition/subtraction of more than 2 measurements

short press and perform the above mentioned

operations required number of times.

Short press

Exit the mode.

CALCULATIONS
Area

Short

press

1 time.

Symbol will appear on the

display. Laser beam will be on.

Short press

Make the 1st measurement (length).

Short press

Make the 2nd measurement (width).

Area (length and width

multiplication) will be calculated

and appear in the main line on the

display.

- Length

- Width

- Area

Short press

Exit the mode.

Wall surface (Vector 80 only)

Short

press

2 times.

Symbol will appear on the
display. Laser beam will be on.

Short press

Make the 1st measurement

(height).

Short press

Make the 2nd measurement

(length 1).

INTENDED USE

Laser distance meters Vector 60 and Vector 80 are intended to

measure distance, to calculate area and volume of measured

objects, perform calculations by tilt sensor* and Pythagoras’

Theorem, point to point measurements*, store results of

measurement/calculation in memory and also transmit via

Bluetooth. The product is suitable for use at both indoor and

outdoor building areas.

*-Vector 80 only.

DELIVERY PACKAGE

The delivery package includes:

1. Laser distance meter – 1pc.

2. Carry pouch with a strap - 1 pc.

3. User manual - 1 pc.

5. USB charger - 1 pc.

TECHNICAL SPECIFICATIONS

Vector 60

Vector 80

Measuring range*

0.05–60 m

0.05–80 m

Measuring accuracy **

± 1.5 mm

Smallest unit displayed

1 mm

Display backlight

+

Reference point

Front, rear, tripod, end-piece

Continuous

measurement (tracking)

+

Max./min. value

+

Addition/subtraction

+

Area/ volume

+

Calculations by

Pythagoras’ Theorem

+

Bluetooth

+

Wall surface

-

+

Calculation of horizontal

distance by tilt sensor

-

+

Point to point

measurement

-

+

Memory

up to 30 values

Laser

Class II, 635 nm, <1 mW

Operating temperature

0 °С ... +40 °С

Storage temperature

–20 °С ... +60 °С

Dust and water

protection

IP54

Power supply

3.7 V 850 mAh Li-ion

rechargeable battery

Dimensions

119*46*28 mm

Weight

0.1 kg

* Use a reflective plate to increase the measurement range

during daylight or if the target has poor reflection properties.

** Accuracy can decrease in unfavorable conditions, such as

intense sunshine or when measurements are made against

glossy or transparent surfaces, moving objects, objects with

rough surface.

In unfavourable conditions or when measured distance is over

100 m themaximum permissible accuracy is calculated in the

following way:

± (Y + 0,25хDх10-3) mm, where

D (mm) - measured distance

Y (mm) - permissible accuracy according to technical data.

PRODUCT DESCRIPTION

Laser distance meter

Лазерный дальномер

Laser-Entfernungsmesser

EN
DE

RU

EN User manual 1-2

DE Bedienungsanleitung 3-4

RU Руководство пользователя 5-6

1

5

4

6

7

10

8

9

8

3

2

6

1

2

3

5

4

- Height

- Length 1

- Area

Short press

Make the 3rd measurement

(length 2)

- Height

- Length 2

- Wall area

3rd, 4th, 5th etc. measurements can be done unlimited

number of times. Each new wall surface is added to

previously calculated wall area result.

Short press

Exit wall area calculation mode.

Volume

Short press

2 times.

(Vector 60)
Short press

3 times.

(Vector 80)

Symbol will appear on the
display. Laser beam will be on.

Short press

Make the first measurement

(length).

Short press

Make the 2nd measurement (width).

- Length

- Width

- Area

Short press

Make the 3rd measurement (height).

- Width

- Height

- Volume

Short press

Exit the mode.

11